Bona Stone, Tile & Laminate Refresher has been renamed. It is now called Bona Stone, Tile & Laminate Polish. The formula remains the same.
Stone, Tile & Laminate Polish is specially formulated waterborne acrylic/urethane maintenance polish for most hard surface floors. It provides a clear, highly durable gloss shine to hard surface floors that are dull, scratched, or beginning to show signs of wear.
Refreshes the appearance of sealed hard surface floors including: laminate (such as Pergo), vinyl, no-wax linoleum, terrazzo, unglazed tile (ceramic, Mexican Saltilo, quarry), stone, and sealed porous marble. Convenient 32 oz. squirt bottle.
- Easy to use
- Coatable over traditional acrylic maintenance products
- Contains UV and scratch protectants
- Non-toxic, waterborne formula
- Environmentally friendly - GREENGUARD certified for indoor air quality
- Dries in one hour
What it does: Bona Polish provides a clear, highly durable gloss shine to stone, tile, and laminate floors that are dull, worn, scratched, or show signs of wear. It refreshes the appearance of these floors with a new bright luster. This product is not a cleaner. Tools needed: Bona Mop, Bona Cleaning Pad, Applicator Pad, Bona Stone, Tile & Laminate Floor Cleaner.
Directions:
1. Remove furniture, rugs, etc. Vacuum, sweep or dust mop, then thoroughly clean with Bona Stone, Tile & Laminate Floor Cleaner and the blue Microfiber Cleaning Pad on your Bona Mop. Allow the floor to dry.
2. Gently rock product back and forth to mix. Slightly dampen the Applicator Pad with water and attach to mop. Squirt product onto the floor and spread. Work in sections small enough to keep the Applicator Pad wet. Smooth with the grain. Continue working in sections until the entire floor is finished. Rinse Applicator Pad with water.
3. Allow to dry at least 1 hour before walking on the floor. For a glossier floor, a second coat may be applied after 2 hours. Allow 24 hours before heavy traffic.
For best results: Always test in an inconspicuous section of the floor before use. Coverage should be 500 square feet per bottle. Do not apply the product too thin or streaking will occur. Coat the entire floor to ensure an even appearance.
Caution: Bona Stone, Tile & Laminate Floor Polish cannot be coated with polyurethane or Bona Hardwood Floor Refresher. Bona Stone, Tile & Laminate Floor Polish is not a cleaner. Make sure the floor is completely clean and dry before applying this product. Do not use over any floor that has been oiled or waxed. Wax and oil may prevent this product from adhering. Always use a clean applicator. Use of contaminated applicator may cause a hazy or streaky appearance. Never use string mops, cotton mops or sponge mops to apply this product. Avoid replacement of furniture and floor mats for at least 24 hours. Not for use on unfinished wood or unsealed floors. Keep from freezing. KEEP OUT OF REACH OF CHILDREN. May cause stomach irritation. If swallowed, drink 1 or 2 glasses of water to dilute. In case of eye contact, flush with water.
Notice: Buyer assumes all responsibility for proper use in accordance with label instructions. Results may vary according to the individual application techniques and prior condition of floor.